919582824900 919582824900

Automatic Center Opening Lift

Automatic Center Opening Lift


Range 4 Persons to 15 persons
Floors 2 floors to 32 Floors
Cabin Decor M.S. Powdercoated, S.S. Brushed Finish, Coloured S.S., Wooden.
Speeds 0.3m/s to 2.5 m/s
Usage Residential, Corporate Office, Commercial, etc.
Locking System Auto Lock
Supply Ability As per Supply Ability Per Month

Additional Information

Product Code REL-12
Min. Order Quantity 1 Piece(s)
Delivery Time 45 Days

Automatic door are recommended for lifts being used at public buildings handling high traffic. Though they require more space in the building as compared to manual doors, it is advisable to go for automatic doors. There is no need for a lift operator. The door panels can be designed to add to the décor of the building.

The range of lifts available is from 4 persons to 40 persons. The speed of travel ranges from single speed of 0.7m/s to variable speeds of 1.5m/s. The cabin walls & door panels can be of M.S. painted, M.S. Powdercoated or Hairline brush finished stainless steel. Glass doors can also be provided but are expensive. Normally center opening doors are advised due to their ease of use and elegance. However in places with a size constraint, telescopic doors can also be provided in which both the doors open towards one side.

Our lifts use Programmable Logic Controllers with auto fault display and detection capability. Modern amenities like variable speeds through ACVVVF drives, Automatic rescue device for electricity failure.


  • Machine Room Height ‘M’-2430, Pit Depth ‘P’-1650
  • Overhead ( F.F.L. of Highest floor to Machine Room Bottom )‘O’-4850
  • Any number of floors can be served. The Side elevation shows only the Top Floor & Bottom Floor for the respective height requirements..
  • All Door heights will be 2000mm clear.
  • Plan for Manual Swing doors / Collapsible doors / Telescopic doors is different.
  • All Sizes are inside finished dimensions in mm.
  • All Hoistway walls are 230 mm thick Brick or 150 mm RCC walls.

Client's Scope

  • Entire Civil Structure for the lift shaft including plaster & painting of lift shaft inside.
  • Three Phase Electric Supply.
  • Scaffolding during Lift erection.
  • Provision of sill support, machine support, Lifting beam / hook, pit ladder, etc.
  • Grouting of our holdfasts, Push button Boxes, Door frame members, etc.
  • Machine room will be extended beyond the lift shaft so that machine is approachable from three sides for maintenance.


  • Hassle free operations
  • Long service life
  • Unmatched performance
  • Rugged design

Yes! I am interested

Submit Your Requirement


Size Table
Person Load Car Inside
‘A’ x ‘B’
Lift Shaft
‘C’ x ‘D’
Machine Room
‘K’ x ‘L’
No. Kgs. Width x Length Width x Length Width
Width x Length
4 272 1100 x 700 1900 x 1550 800 3000 x 3000
6 408 1100 x 1000 2000 x 1650 800 3000 x 3000
8 544 1300 x 1100 2000 x 1750 800 3000 x 3000
10 680 1350 x 1300 2100 x 1950 900 4000 x 3000
13 884 1500 x 1500 2100 x 2150 900 4000 x 3000
16 1088 1750 x 1500 2350 x 2150 1000 4000 x 3600
20 1360 2000 x 1600 2600 x 2250 1000 4500 x 3600
24 1632 2100 x 1800 2600 x 2350 1100 4500 x 3600


  • Explore More Products

Looking for "Automatic Center Opening Lift" ?