Manual Door Passenger Lift

Manual door lifts are preferred for low cost installations at private buildings handling where lift usage is infrequent. The advantages are low cost, low space requirement fast installation, low maintenance, low operation cost.

The range of lifts available is from 4 persons to 40 persons. The cabin walls can be of M.S. painted, M.S. Powdercoated or Hairline brush finished stainless steel. Collapsible channel gates or Swing doors with glass vision windows can be provided. Swing doors can be varied from floor to floor to suit the décor.

The lifts can be traction machine based or hydraulic machine based depending on the machine room location.

Notes

• Machine Room Height  ‘M’2430, Overhead  ( 0.7m/s speed) ‘O’ – 4270
• Pit Depth -‘P’-1650, Overhead  ( > 0.7 m/s speed ) ‘O’ – 4600
• Any number of floors can be served. The Side elevation shows only the Top Floor & Bottom Floor for the respective height requirements..
• All Door heights will be 2000 clear. Door Lintel Bottom should be at 2150 from FFL.
• Plan for Manual Swing doors / Collapsible doors / Telescopic doors is different.
• All Sizes are inside finished dimensions in mm.
• All Hoistway walls are 230 mm thick Brick or 150 mm RCC walls.

Client's Scope

• Entire Civil Structure for the lift shaft including plaster & painting of lift shaft inside.
• Three Phase Electric Supply.
• Scaffolding during Lift erection.
• Provision of sill support, machine support, Lifting beam / hook, pit ladder, etc.
• Grouting of our holdfasts, Push button Boxes, Door frame members, etc.
• Machine room will be extended beyond the lift shaft so that machine is approachable from three sides for maintenance.